Extra Heavy Duty Geared Head Lathe Machine - Available In Wide Ranges
We are the leading Extra Heavy Duty Geared Head Lathe Machine Centre Height 500mm Manufacturers In India. This machine comes in Eight models ranging from 1000 mm to 4930 mm and has standard main spindle dimensions of 104mm and an average centre height of 500mm. In addition, we provide high-end accessories for further customisation and upgradations.
| EXTRA HEAVY DUTY GEARED HEAD LATHE MACHINE SERIES “KGEH“ |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Centre Height : 500mm |
| 3) Spindle Bore : 104mm |
| 4) Bed Width : 550mm |
| 5) Swing Over Bed : 940mm |
| 6) Swing Over Cross Slide : 700mm |
| 7) Swing In Gap : 1260mm |
| 8) Bed Length: 2135 MM (7′), 2745 MM (9′), 3050 MM (10′), 3660 MM (12′), 4270 MM(14′), 4875 MM (16′), 5485 MM(18′), 6095 MM (20′) |
| Features |
|---|
| 1) Suitable For Metric and Inch Thread |
| 2) High Quality Casting |
| 3) Hardened Tail Stock |
| 4) Suitable for precision job works |
| 5) Interchangeable parts |
| 6) 38 MMa x 4 TPI Lead screw |
| 7)Tail Stcok Spindle EN-8 Harden |
| 8) Accuracy As Per ISI Standrad |
| 10) 18″ Heavy Duty Gears along with heavy Pulley |
| 11) 14″ Heavy Cross Slide |
| 12) 6″ x 6″ Heavy Tool Post |
| MAIN SIPINDLE | DIMENSIONS |
|---|---|
| SPINDLE BORE | 104 MM |
| SPINDLE MORSE TAPER | MT-6 |
| SPINDLE ADAPTER MORSE TAPER | MT-4 |
| SPINDLE SPEEDS NOS/RANGE | 9/ 19 TO 310 MM |
| TYPE OF SPINDLE NOSE | A2-8 |
| SPINDLE MOUNTING STANDARD | TAPER ROLLER BEARING |
| TAIL STOCK SPINDLE | DIMENSIONS (MM) |
|---|---|
| TAIL STOCK SPINDLE DIAMETER | 100 |
| TAIL STOCK SPINDLE TRAVEL | 300 |
| TAIL STOCK SPINDLE MORSE TAPER | MT-5 |
| LEAD SCREW | DIMENSIONS |
|---|---|
| LEAD SCREW DIAMETER | 50.8 MM |
| LEAD SCREW THREADS | 2 T.P.I |
| NOS OF THREAD / RANGE (METRIC) | 24/ 0.5 MM TO 15 MM PITCH |
| NOS OF THREAD / RANGE (INCH) | 43 / 2MM TO 60 TPI PITCH |
Technology From Tomorrow
Models & Accessories
Our product Models and applications will give you a better insight into the product!
| MODEL | ADMIN BETWEEN CENTRE | LENGTH OF BED |
|---|---|---|
| MODEL KGH-1 | 700 MM | 2135 MM (7′) |
| MODEL KGH-2 | 1300 MM | 2745 MM (9′) |
| MODEL KGH-3 | 1600 MM | 3050 MM (10′) |
| MODEL KGH-4 | 2200 MM | 3660 MM (12′) |
| MODEL KGH-5 | 2800 MM | 4270 MM (14′) |
| MODEL KGH-6 | 3400 MM | 4875 MM (16′) |
| MODEL KGH-7 | 4000 MM | 5485 MM (18′) |
| MODEL KGH-8 | 4600 MM | 6095 MM (20′) |
| ELECTRICALS |
|---|
| 1) Motor 10 H.p /0.75 Kw |
| 2) 3 Phase, 50hz, 440v |
| 3) 1440 Rpm |
| 4) With Reverse –forward Switch |
| 5) V-belt |
| 6) Electrical Wirings |
| 7) Fittings |
| STANDARD ACCESSORIES |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Chuck Plate |
| 3) Dead Centre (2 Nos), Tool Post Key |
| 4) Spindle Sleeve |
| 5) Motor Pulley |
| 6) Thread Dial Indicator |
| 7) Chip Tray |
| 8) Change Gear Set (for Metric And Inch Both) |
| OPTIONAL ACCESSORIES |
|---|
| 1) Face plate |
| 2) Carrier Plate |
| 3) Steady Rest |
| 4) Follow Rest |
| 5) Taper Turning Attachment |
| 6) Motorised Coolant Pump With Tank Fittings |
| 7) Rear Tool Post With Extended Cross Slide |
| 8) Norton Gearbox And Electricals ( Panel, Push Button, Wiring, Switch, Motor, V-belt And Fittings) |
| 9) Electrical Switch Shaft And Splash Guard |
