Extra Heavy Duty Geared Head Lathe Machine - Available In Wide Ranges
We are the leading Extra Heavy Duty Geared Head Lathe Machine Centre Height 700mm Manufacturers In India. This machine comes in Seven models ranging from 900mm to 4200mm and has standard main spindle dimensions of 125mm and an average centre height of 700mm. In addition, we provide high-end accessories for further customisation and upgradations.
| EXTRA HEAVY DUTY GEARED HEAD LATHE MACHINE SERIES “KGEH“ |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Centre Height : 700mm |
| 3) Spindle Bore : 125mm |
| 4) Bed Width : 760mm |
| 5) Swing Over Bed : 1350mm |
| 6) Swing Over Cross Slide : 10400mm |
| 7) Swing In Gap : 1730mm |
| 8) Bed Length: 2745 MM (9′), 3050 MM (10′), 3660 MM (12′), 4270 MM(14′), 4875 MM (16′), 5485 MM(18′), 6095 MM (20′) |
| Features |
|---|
| 1) Suitable For Metric and Inch Thread |
| 2) High Quality Casting |
| 3) Hardened Tail Stock |
| 4) Suitable for precision job works |
| 5) Interchangeable parts |
| 6) 38 MMa x 4 TPI Lead screw |
| 7) Tail Stcok Spindle EN-8 Harden |
| 8) Accuracy As Per ISI Standrad |
| 10) 18″ Heavy Duty Gears along with heavy Pulley |
| 11) 14″ Heavy Cross Slide |
| 12) 6″ x 6″ Heavy Tool Post |
| 13) 1.25″ Thickness Panja Gears with 9 D.P |
| 14) C Section Belts in main Pulley and Motor Pulley |
| 15) Both side 6208 Double Bearing ij Cointer Pedestal with 2″ heavy shaft |
| 16) Heaviest Machine in this segment |
| MAIN SIPINDLE | DIMENSIONS |
|---|---|
| SPINDLE BORE | 125 MM |
| SPINDLE MORSE TAPER | MT-6 |
| SPINDLE SPEEDS NOS/RANGE | 8/ 14 TO 200 RPM |
| TYPE OF SPINDLE NOSE | A2-11 |
| SPINDLE MOUNTING STANDARD | TAPER ROLLER BEARING |
| TAIL STOCK SPINDLE | DIMENSIONS (MM) |
|---|---|
| TAIL STOCK SPINDLE DIAMETER | 100 |
| TAIL STOCK SPINDLE TRAVEL | 300 |
| TAIL STOCK SPINDLE MORSE TAPER | MT-5 |
| LEAD SCREW | DIMENSIONS |
|---|---|
| LEAD SCREW DIAMETER | 50.8 MM |
| LEAD SCREW THREADS | 2 T.P.I |
| NOS OF THREAD / RANGE (METRIC) | 24/ 0.5 MM TO 15 MM PITCH |
| NOS OF THREAD / RANGE (INCH) | 43 / 2MM TO 60 TPI PITCH |
Technology From Tomorrow
Models & Accessories
Our product Models and applications will give you a better insight into the product!
| MODEL | ADMIN BETWEEN CENTRE | LENGTH OF BED |
|---|---|---|
| MODEL KGH-1 | 900 MM | 2745 MM (9′) |
| MODEL KGH-2 | 1200 MM | 3050 MM (10′) |
| MODEL KGH-3 | 1800 MM | 3660 MM (12′) |
| MODEL KGH-4 | 2400 MM | 4270 MM (14′) |
| MODEL KGH-5 | 3000 MM | 4875 MM (16′) |
| MODEL KGH-6 | 3600 MM | 5485 MM (18′) |
| MODEL KGH-7 | 4200 MM | 6095 MM (20′) |
| ELECTRICALS |
|---|
| 1) Motor 10 H.p /0.75 Kw |
| 2) 3 Phase, 50hz, 440v |
| 3) 1440 Rpm |
| 4) With Reverse |
| 5) Forward Switch |
| 6) V-belt |
| 7) Electrical Wirings |
| 8) Fittings |
| STANDARD ACCESSORIES |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Chuck Plate |
| 3) Dead Centre (2 Nos), Tool Post Key |
| 4) Spindle Sleeve |
| 5) Motor Pulley |
| 6) Thread Dial Indicator |
| 7) Chip Tray |
| 8) Change Gear Set (for Metric And Inch Both) |
| OPTIONAL ACCESSORIES |
|---|
| 1) Face plate |
| 2) Carrier Plate |
| 3) Steady Rest |
| 4) Follow Rest |
| 5) Taper Turning Attachment |
| 6) Motorised Coolant Pump With Tank Fittings |
| 7) Rear Tool Post With Extended Cross Slide |
| 8) Norton Gearbox And Electricals ( Panel, Push Button, Wiring, Switch, Motor, V-belt And Fittings) |
| 9) Electrical Switch Shaft And Splash Guard |
