Extra Heavy Duty Lathe Machine - Available In Wide Ranges
We have been involved in the manufacturing of Extra Heavy Duty Lathe Machine-375mm. The machine has a centre height of 375mm while the swing gap is of 1050mm. Our efficient technical team is capable of manufacturing custom specifications by elevating the machine with high-end accessories and features.
| SPECIFICATION | DIMENSIONS (MM) |
|---|---|
| CENTRE HEIGHT OVER BED WAYS | 375 |
| SWING OVER BED | 730 |
| SWING OVER CROSS SLIDE | 550 |
| SWING IN GAP | 1050 |
| LENGTH OF GAP IN FRONT OF FACE PLATE | 200 |
| WIDTH OF BED | 375 |
| MAIN SIPINDLE | DIMENSIONS |
|---|---|
| STANDARD(OPTIONAL) | 51MM(79MM , 102 MM, 129MM, 150MM) |
| SPINDLE MORSE TAPER | MT-6 |
| SPINDLE ADAPTER MORSE TAPER | MT-4 |
| SPINDLE SPEEDS NOS/RANGE | 8/28 TO 520 MM |
| SPINDLE DRIVE STANDRAD | V-BELT |
| SPINDLE MOUNTING STANDARD | TAPER ROLLER BEARING |
| LEAD SCREW | DIMENSIONS |
| LEAD SCREW DIAMETER | 38MM |
| LEAD SCREW THREADS | 4 T.P.I |
| NOS OF THREAD / RANGE (METRIC) WITHOUT NORTON GEAR BOX | 13/1 MM TO 6 MM PITCH |
| NOS OF THREAD / RANGE (METRIC) WITH NORTON GEAR BOX | 17/0.5MM TO 15 MM PITCH |
| NOS OF THREAD / RANGE (INCH) WITHOUT NORTON GEAR BOX | 19/2 TO 24 T.P.I |
| NOS OF THREAD / RANGE (INCH) WITH NORTON GEAR BOX | 44/2 TO 60 T.P.I |
Technology From Tomorrow
Models & Accessories
Our product applications will give you a better insight into the product!
| MODEL | ADMIN BETWEEN CENTRE | LENGTH OF BED | FLOOR SPACE | APROX CASE DIEMSION (MM) |
|---|---|---|---|---|
| MODEL KH-1 | 1000 MM | 2135 (7′) | 2660 X1450 | 2850 X1300 X1600 |
| MODEL KH-2 | 1600 MM | 2745 (9′) | 3140 X1450 | 3350 X1300 X1600 |
| MODEL KH-3 | 1900 MM | 3050 (10′) | 3500 X1450 | 3700 X1300 X1600 |
| MODEL KH-4 | 2500 MM | 3660 (12′) | 4110 X1450 | 4300 X1300 X1600 |
| MODEL KH-5 | 3100 MM | 4270 (14′) | 4720 X1450 | 5000 X1300 X1600 |
| MODEL KH-6 | 3710 MM | 4875 (16′) | 5330 X1450 | 5550 X1300 X1600 |
| MODEL KH-7 | 4320 MM | 5485 (18′) | 5940 X1450 | 6100 X1300 X1600 |
| MODEL KH-8 | 4930 MM | 6095 (20′) | 6550 X1450 | 6710 X1300 X1600 |
| ELECTRICALS |
|---|
| MOTOR 1 H.P /0.75 KW |
| 3 PHASE |
| 50HZ, 440V |
| 1440 RPM |
| WITH REVERSE –FORWARD SWITCH |
| V-BELT |
| ELECTRICAL WIRINGS AND FITTINGS |
| STANDARD ACCESSORIES |
| FLAME HARDENED BED WAYS |
| CHUCK PLATE |
| DEAD CENTRE (2 NOS) |
| TOOL POST KEY |
| SPINDLE SLEEVE |
| MOTOR PULLEY |
| THREAD DIAL INDICATOR |
| CHIP TRAY |
| CHANGE GEAR SET (FOR METRIC AND INCH BOTH) |
| OPTIONAL ACCESSORIES |
| FACE PLATE |
| STEADY REST |
| FOLLOW REST |
| TAPER TURNING ATTACHMENT |
| MOTORISED COOLANT PUMP WITH TANK FITTINGS |
| REAR TOOL POST WITH EXTENDED CROSS SLIDE |
| NORTON GEAR BOX AND ELECTRICALS ( WIRING, SWITCH, MOTOR , V-BELT AND FITTINGS) |
| CARRIER PLATE |
