Extra Heavy Duty Lathe Machine - Available In Wide Ranges
We have been involved in the manufacturing of Extra Heavy Duty Lathe Machine -600mm. The machine has a Width Of Bed of 610mm while the swing gap is of 1500mm. Our efficient technical team is capable of manufacturing custom specifications by elevating the machine with high-end accessories and features.
| SPECIFICATION | DIMENSIONS (MM) |
|---|---|
| CENTRE HEIGHT OVER BED WAYS | 610 |
| SWING OVER BED | 1140 |
| SWING OVER CROSS SLIDE | 825 |
| SWING IN GAP | 1500 |
| LENGTH OF GAP IN FRONT OF FACE PLATE | 250 |
| WIDTH OF BED | 610 |
| MAIN SIPINDLE | DIMENSIONS |
|---|---|
| STANDARD (OPTIONAL) | 104MM ( 125 MM, 150MM, 175MM) |
| SPINDLE MORSE TAPER | MT-6 |
| SPINDLE SPEEDS NOS/RANGE | 8/ 20 TO 200 RPM |
| SPINDLE DRIVE STANDRAD | V-BELT |
| SPINDLE MOUNTING STANDARD | TAPER ROLLER BEARING |
| TAIL STOCK | DIMENSIONS (MM) |
| DIAMETER | 125MM |
| MORSE TAPER | MT-5 |
| TRAVEL | 300 MM |
| LEAD SCREW | DIMENSIONS |
| LEAD SCREW DIAMETER | 50.8 MM |
| LEAD SCREW THREADS | 2 T.P.I |
| NOS OF THREAD / RANGE (METRIC) X | 13/1 MM TO 6 MM PITCH |
| NOS OF THREAD / RANGE (INCH) | 20/ 1 TO 24 T.P.I |
Technology From Tomorrow
Models & Accessories
Our product Models and applications will give you a better insight into the product!
| MODEL | ADMIN BETWEEN CENTRE | LENGTH OF BED |
|---|---|---|
| MODEL KEH-1 | 600 MM | 2135 (7′) |
| MODEL KEH-2 | 900 MM | 2745 (9′) |
| MODEL KEH-3 | 1200 MM | 3050 (10′) |
| MODEL KEH-4 | 1800 MM | 3660 (12′) |
| MODEL KEH-5 | 2400 MM | 4270 (14′) |
| MODEL KEH-6 | 3000 MM | 4875 (16′) |
| MODEL KEH-7 | 3600 MM | 5485 (18′) |
| MODEL KEH-8 | 4200 MM | 6095 (20′) |
| ELECTRICALS |
|---|
| MOTOR 10 H.P |
| 3 PHASE |
| 50HZ, 440V |
| 1440 RPM |
| WITH REVERSE –FORWARD SWITCH |
| V-BELT |
| ELECTRICAL WIRINGS AND FITTINGS |
| STANDARD ACCESSORIES |
| FLAME HARDENED BED WAYS |
| CHUCK PLATE |
| DEAD CENTRE (2 NOS) |
| TOOL POST KEY |
| SPINDLE SLEEVE |
| MOTOR PULLEY |
| THREAD DIAL INDICATOR |
| CHIP TRAY |
| CHANGE GEAR SET (FOR METRIC AND INCH BOTH) |
| OPTIONAL ACCESSORIES |
| FACE PLATE |
| STEADY REST |
| FOLLOW REST |
| TAPER TURNING ATTACHMENT |
| MOTORISED COOLANT PUMP WITH TANK FITTINGS |
| REAR TOOL POST WITH EXTENDED CROSS SLIDE |
| NORTON GEAR BOX AND ELECTRICALS ( WIRING, SWITCH, MOTOR , V-BELT AND FITTINGS) |
| CARRIER PLATE |
