Heavy Duty Geared Head Lathe Machine - Available In Wide Ranges
We are the leading Heavy Duty Geared Head Lathe Machine Centre Height 267mm Manufacturers In India. This machine comes in Eight models ranging from 1000 mm to 4930 mm and has standard main spindle dimensions of 52mm and an average Centre height of 267 mm. In addition, we provide high-end accessories for further customisation and upgradations.
| HEAVY DUTY GEARED HEAD LATHE MACHINE SERIES “KGH” |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Centre Height : 267mm |
| 3) Spindle Bore : 52mm |
| 4) Bed Width : 325mm |
| 5) Swing Over Bed : 525mm |
| 6) Swing Over Cross Slide : 300mm |
| 7) Swing In Gap : 830mm |
| 8) Bed Length: 2135 MM (7′), 2745 MM (9′), 3050 MM (10′), 3660 MM (12′), 4270 MM(14′), 4875 MM (16′), 5485 MM(18′), 6095 MM (20′) |
| FEATURES | 1) Suitable For Metric and Inch Thread |
|---|
| 2) High Quality Casting |
| 3) Hardened Tail Stock |
| 4) Suitable for precision job works |
| 5) Interchangeable parts |
| 6) 38 MMa x 4 TPI Lead screw |
| 7)Tail Stcok Spindle EN-8 Harden |
| 8) Accuracy As Per ISI Standrad |
| 10) 18″ Heavy Duty Gears along with heavy Pulley |
| 11) 14″ Heavy Cross Slide |
| 12) 6″ x 6″ Heavy Tool Post |
| MAIN SIPINDLE | DIMENSIONS |
|---|---|
| SPINDLE BORE | 52 MM |
| SPINDLE MORSE TAPER | MT-6 |
| SPINDLE ADAPTER MORSE TAPER | MT-4 |
| SPINDLE SPEEDS NOS/RANGE | 12/ 30 TO 1060 MM |
| TYPE OF SPINDLE NOSE | A2-6 |
| SPINDLE MOUNTING STANDARD | TAPER ROLLER BEARING |
| TAIL STOCK SPINDLE | DIMENSIONS (MM) |
|---|---|
| TAIL STOCK SPINDLE DIAMETER | 57 |
| TAIL STOCK SPINDLE TRAVEL | 175 |
| TAIL STOCK SPINDLE MORSE TAPER | MT-4 |
| LEAD SCREW | DIMENSIONS |
|---|---|
| LEAD SCREW DIAMETER | 38 MM |
| LEAD SCREW THREADS | 4 T.P.I |
| NOS OF THREAD / RANGE (METRIC) | 17/ 0.5 MM TO 15 MM PITCH |
| NOS OF THREAD / RANGE (INCH) | 40 / 2MM TO 60 TPI PITCH |
Technology From Tomorrow
Models & Accessories
Our product Models and applications will give you a better insight into the product!
| MODEL | ADMIN BETWEEN CENTRE | LENGTH OF BED | FLOOR SPACE | APROX CASE DIEMSION (MM) |
|---|---|---|---|---|
| MODEL KGH-1 | 1000 MM | 2135 MM (7′) | 2660 X1450 | 2850 X1300 X1600 |
| MODEL KGH-2 | 1600 MM | 2745 MM (9′) | 3140 X1450 | 3350 X1300 X1600 |
| MODEL KGH-3 | 1900 MM | 3050 MM (10′) | 3500 X1450 | 3700 X1300 X1600 |
| MODEL KGH-4 | 2500 MM | 3660 MM (12′) | 4110 X1450 | 4300 X1300 X 1600 |
| MODEL KGH-5 | 3100 MM | 4270 MM (14′) | 4720 X1450 | 5000 X1300 X1600 |
| MODEL KGH-6 | 3710 MM | 4875 MM (16′) | 5330 X1450 | 5550 X1300 X1600 |
| MODEL KGH-7 | 4320 MM | 5485 MM (18′) | 5940 X1450 | 6100 X1300 X1600 |
| MODEL KGH-8 | 4930 MM | 6095 MM (20′) | 6550 X1450 | 6710 X1300 X1600 |
| ELECTRICALS |
|---|
| 1) Motor 3 H.p /0.75 Kw |
| 2) 3 Phase, 50hz, 440v |
| 3) 1440 Rpm |
| 4) With Reverse –forward Switch |
| 5) V-belt Wirings |
| 6)Electrical |
| 7)Fittings |
| STANDARD ACCESSORIES |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Chuck Plate |
| 3) Dead Centre (2 Nos), Tool Post Key |
| 4) Spindle Sleeve |
| 5) Spindle Sleeve |
| 6) Motor Pulley |
| 7) Thread Dial Indicator |
| 8) Chip Tray |
| 9) Change Gear Set (for Metric And Inch Both) |
| OPTIONAL ACCESSORIES |
|---|
| 1) Face plate |
| 2) Carrier Plate |
| 3) Steady Rest |
| 4) Follow Rest |
| 5) Taper Turning Attachment |
| 6) Motorised Coolant Pump With Tank Fittings |
| 7) Rear Tool Post With Extended Cross Slide |
| 8) Norton Gearbox And Electricals ( Panel, Push Button, Wiring, Switch, Motor, V-belt And Fittings) |
| 9) Electrical Switch Shaft And Splash Guard |
