Light Duty Geared Head Lathe Machine - Available In Wide Ranges
We are the leading Light Duty Geared Head Lathe Machine Center Height 165mm Manufacturers In India. This machine comes in three models ranging from 660 mm to 1135 mm and has standard main spindle dimensions of 38mm and an average centre height of 165 mm. In addition, we provide high-end accessories for further customisation and upgradations.
| SPECIFICATIONS |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Centre Height : 165mm |
| 3) Spindle Bore : 40mm |
| 4) Bed Width : 225mm |
| 5) Swing Over Bed : 325mm |
| 6) Swing Over Cross Slide : 175mm |
| 7) Swing In Gap : 500mm |
| 8) Bed Length: 1370mm (4.5′) , 1600 (5.3″) , 1830 (6′) |
| FEATURES |
|---|
| 1) Suitable For Metric and Inch Thread |
| 2) High-Quality Casting |
| 3) Hardened Tail Stock |
| 4) Suitable for precision job works |
| 5) Interchangeable parts |
| 6) NORTON Gear Box for easy threading job works |
| 7) Heavy-duty cross slide and compound slide |
| 8) All cross slide and compound slide nuts are in Gun Metal Material |
| 9) Gunmetal Wiper |
| MAIN SPINDLE | DIMENSIONS |
|---|---|
| STANDARD | 38 MM |
| SPINDLE MORSE TAPER | MT-5 |
| SPINDLE ADAPTER MORSE TAPER | MT-3 |
| SPINDLE SPEEDS NOS/RANGE | 8/ 54 TO 1200 MM |
| TYPE OF SPINDLE NOSE | THREADED |
| SPINDLE MOUNTING STANDARD | TAPER ROLLER BEARING |
| TAILSTOCK SPINDLE | DIMENSIONS |
|---|---|
| TAILSTOCK SPINDLE DIAMETER | 38.1 |
| TAILSTOCK SPINDLE TRAVEL | 120 |
| TAILSTOCK SPINDLE MORSE TAPER | MT-3 |
| LEAD SCREW | DIMENSIONS |
|---|---|
| LEAD SCREW DIAMETER | 25.4 MM |
| LEAD SCREW THREADS | 4 T.P.I |
| NOS OF THREAD / RANGE (METRIC) | 17/ 0.5 MM TO 15 MM PITCH |
| NOS OF THREAD / RANGE (INCH) | 40 / 2MM TO 60 TPI PITCH |
Technology From Tomorrow
Models & Accessories
Our product Models and applications will give you a better insight into the product!
| MODEL | ADMIN BETWEEN CENTRE | LENGTH OF BED | FLOOR SPACE | APROX CASE DIMENSION (MM) |
|---|---|---|---|---|
| MODEL KGL-2 | 660 MM | 1370 MM(4.5′) | 1500 X 850 | 1700 X 900 X1350 |
| MODEL KGL-3 | 890 MM | 1600MM (5’3″) | 1750 X 850 | 1950 X 900 X1350 |
| MODEL KGL-4 | 1135 MM | 1820 MM(6′) | 2200 X 850 | 2400 X 900 X 1350 |
| ELECTRICALS |
|---|
| 1) Motor 2 H.p /0.75 kW |
| 2) 3 Phase, 50hz, 440v |
| 3) 1440 Rpm |
| 4) Reverse Switch |
| 5) Forward Switch |
| 6) V-belt |
| 7) Electrical Wirings |
| 8) Fittings |
| STANDARD ACCESSORIES |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Chuck Plate |
| 3) Dead Centre (2 Nos), Tool Post Key |
| 4) Spindle Sleeve |
| 5) Motor Pulley |
| 6) Thread Dial Indicator |
| 7) Chip Tray |
| 8) Change Gear Set (for Metric And Inch Both) |
| OPTIONAL ACCESSORIES |
|---|
| 1) Faceplate |
| 2) Carrier Plate |
| 3) Steady Rest |
| 4) Follow Rest |
| 5) Taper Turning Attachment |
| 6) Motorised Coolant Pump With Tank Fittings |
| 7) Rear Tool Post With Extended Cross Slide |
| 8) Norton Gearbox And Electricals ( Panel, Push Button, Wiring, Switch, Motor, V-belt And Fittings) |
| 9) Electrical Switch Shaft And Splash Guard |
