Medium Duty Geared Head Lathe Machine - Available In Wide Ranges
We are the leading Medium Duty Geared Head Lathe Machine Centre Height 215mm Manufacturers In India. This machine comes in three models ranging from 450 mm to 900 mm and has standard main spindle dimensions of 52mm and an average Centre height of 215mm. In addition, we provide high-end accessories for further customisation and upgradations.
| SPECIFICATIONS |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Centre Height : 215mm |
| 3) Spindle Bore : 52mm |
| 4) Bed Width : 277mm |
| 5) Swing Over Bed : 420mm |
| 6) Swing Over Cross Slide : 240mm |
| 7) Swing In Gap : 620mm |
| 8) Bed Length: 1370mm (4.5′) , 1600 (5.3″) , 1830 (6′) |
| FEATURES |
|---|
| Suitable For Metric and Inch Thread |
| High Quality Casting |
| Hardened Tail Stock |
| Suitable for precision job works |
| Interchangeable parts |
| NORTON Gear Box for easy threading job works |
| Heavy duty Cross slide and compound slide |
| All cross slide and compound slide nuts are in Gun Metal Material |
| Gun metal Wiper |
| MAIN SIPINDLE | DIMENSIONS |
|---|---|
| SPINDLE BORE | 52 MM |
| SPINDLE MORSE TAPER | MT-6 |
| SPINDLE ADAPTER MORSE TAPER | MT-4 |
| SPINDLE SPEEDS NOS/RANGE | 8/ 40 TO 550 MM |
| TYPE OF SPINDLE NOSE | THREADED (OPTIONAL A2-6) |
| SPINDLE MOUNTING STANDARD | TAPER ROLLER BEARING |
| TAIL STOCK SPINDLE | DIMENSIONS |
|---|---|
| TAIL STOCK SPINDLE DIAMETER | 50.8 |
| TAIL STOCK SPINDLE TRAVEL | 120 |
| TAIL STOCK SPINDLE MORSE TAPER | MT-4 |
| LEAD SCREW | DIMENSIONS |
|---|---|
| LEAD SCREW DIAMETER | 31.75 MM |
| LEAD SCREW THREADS | 4 T.P.I |
| NOS OF THREAD / RANGE (METRIC) | 17/ 0.5 MM TO 15 MM PITCH |
| NOS OF THREAD / RANGE (INCH) | 40 / 2MM TO 60 TPI PITCH |
Technology From Tomorrow
Models & Accessories
Our product Models and applications will give you a better insight into the product!
| MODEL | ADMIN BETWEEN CENTRE | LENGTH OF BED | FLOOR SPACE | APROX CASE DIEMSION (MM) |
|---|---|---|---|---|
| MODEL KGL-2 | 450 MM | 1370 MM(4.5′) | 1650 X 970 | 1850 X 970 X1500 |
| MODEL KGL-3 | 725 MM | 1600MM (5’3″) | 1950X 970 | 2150 X 970 X1500 |
| MODEL KGL-4 | 900 MM | 1820 MM(6′) | 2100 X 970 | 2300 X 970 X 1500 |
| ELECTRICALS |
|---|
| 1) Motor 2 H.p /0.75 kW |
| 2) 3 Phase, 50hz, 440v |
| 3) 1440 Rpm |
| 4) Reverse Switch |
| 5) Forward Switch |
| 6) V-belt |
| 7) Electrical Wirings |
| 8) Fittings |
| STANDARD ACCESSORIES |
|---|
| 1) Flame Hardened Bed Ways |
| 2) Chuck Plate, Dead Centre (2 Nos) |
| 3) Tool Post Key |
| 4) Spindle Sleeve |
| 5) Motor Pulley |
| 6) Thread Dial Indicator |
| 7) Chip Tray |
| 8) Change Gear Set (for Metric And Inch Both) |
| OPTIONAL ACCESSORIES |
|---|
| 1) Face Plate |
| 2) Carrier Plate |
| 3) Steady Rest |
| 4) Follow Rest |
| 5) Taper Turning Attachment |
| 6) Motorised Coolant Pump With Tank Fittings |
| 7) Rear Tool Post With Extended Cross Slide |
| 8) Norton Gearbox And Electricals ( Panel, Push Button, Wiring, Switch, Motor, V-belt, And Fittings) |
| 9) Wiring |
| 10) Switch |
| 11) Motor |
| 12 V-belt And Fittings) and Electrical Switch Shaft And Spalsh Guard |
