Pillar Drilling Machine Model Epdm- Available In Wide Ranges
The Pillar Drilling Machine Model Epdm-25/250MD comes in different models and sizes. The drilling capacity ( C.S and M.S ) ranges from 25 to 25. We manufacture and supply the best quality drilling machines. We manufacture all these machines in compliance with bar code standards.
| FEATURES |
|---|
| RIGID HEAD STOCK AND MAIN SPINDLE MOUNTED ON TAPER ROLLER BEARINGS ENSURE VIBRATION FREE CASTING |
| BACK GEARED ASSEMBLY DESIGNED BY FOUR SIDE BEARING BASED FITTING TO WITH STAND HEAVY LOAD |
| STEP PULLEY IS BALANCED BY COUNTER DRILLING |
| SPINDLE ASSEMBLY BALANCED BY GUIDED COUNTER WEIGHT |
| DRILLING HEAD HAVING TAPER GUIDE WAYS WITH TAPER WEDGES PROVIDE STRENGTH TO WITH STAND HEAVY CUTTING FORCE |
| MACHINE OVER ALL CASTING MATERIAL IS HIGH QUALITY CLOSED GRAIN CASTING |
| MAIN SPINDLE IS MADE OUT OF EN-8-D, ALLOY STEEL MATERIAL & GRINDING FINISH |
| ALL THE GEARS IS MADE OUT OF 20MN-CR-5 MATERIAL AND HARDENED & GRINDING FINISH |
| SPINDLE SHAFT IS MADE OUT OF SAE-8620 MATERIAL AND HARDENED & GRINDING FINISH |
| BACK GEARED CASTING MATERIAL IS MADE OUT OF SGI-412 GRADED CASTING |
| STANDARD ACCESSORIES |
|---|
| MOTOR PULLEY |
| OPTIONAL ACCESSORIES |
| MOTOR 1.5 H.P 3 PH 1440 ROM |
| V-BELT |
| STATER |
| DRILL CHUCK |
| DRILL CHUCK ARBOUR |
| DRILL CHUCK SLEEVE |
| Short Description |
|---|
| Max Drilling CAPACITY (M.S): 25 |
| Max Drilling CAPACITY (C.I): 25 |
| Powe( HP): 1.5 |
| Spindle Speed (MIN/MAX): 08 (130/2600) |
Technology From Tomorrow
Technical Specifications Of Product
Our product Technical Specifications and applications will give you a better insight into the product!
| SPECIFICATION | DIMENSION (MM) |
|---|---|
| MODEL | EPDM-25/250MD |
| MACHINE CAPACITY | |
| Drilling (C.I) | 25 |
| Drilling (M.S) | 25 |
| Tapping CAP | 15 |
| DRILLING HEAD | |
| Taper Spindle | MT-3 |
| Quill Movement | 175 |
| SPEEDS | |
| No. of Range of Spindle | 8 |
| Spindle Speed (min/max) | 130/2600 |
| FEEDS | |
| No. Range of Feed | MANUAL |
| WORKING RANGE | |
| Dist. From Spindle Centre to Column Face | 250 |
| Max. Dist From Spindle to Base Plate | 970 |
| Max. Dist From Spindle to Work table | 530 |
| WORKING TABLE | |
| Table Diameter | 325 X 325 |
| BASE PLATE & COLUMN | |
| Column Diameter | 92 |
| Base Plate | 580X 365 |
| No. of ‘T’ Slots | 2 |
| Power | |
| Drilling Motor | 1.5 H.P 1440 RPM |
| WEIGHT (KGS) | 225 |
| V-BELT | B-52 |
