Radial Drilling Machine Model ER-AF-40/900 - Available In Wide Ranges
The Radial Drilling Machine Model ER-AF-40/900 comes with a sturdy design and the latest technology. In addition, our machine will give full returns on your investment. The main spindle and the headstock get mounted on taper roller bearings to ensure smooth and vibration-free cutting. We are the renowned Radial Drilling Machine Model ER-AF-40/900 manufacturers and suppliers In India.
| FEATURES |
|---|
| TIME SAVING RAPID PRODUCTION DUE TO SINGLE GEAR CHANGER |
| RIGID HEAD STOCK AND MAIN SPINDLE MOUNTED ON TAPER ROLLER BEARINGS ENSURE VIBRATION FREE CUTTING |
| ARM LIFTING MOTOR IS DIRECT GEARED ASSEMBLY AND AUTO UP-DOWN. |
| EACH AND EVERY GEAR FRICTION FEED GEAR GEAR IS WITH BEARING FITTED |
| SPALSH LUBRICATION FOR FEED GEARING |
| GEAR BOX IS FULLY OIL BATH |
| SPINDLE ASSEMBLY BALANCED BY GUIDED COUNTER WEIGHT |
| AUTOMATIIC DISENGAGEMENT OF POWER FEED AT REQUIRED DEPTH OF DRILLING |
| MACHINE OVER ALL CASTING MATERIAL IS HIGH QUALITY CLOSED GRAIN CASTING |
| MAIN SPINDLE IS MADE OUT OF EN-8-D, ALLOY STEEL MATERIAL GRINDING FINISH |
| ALL THE GEARS IS MADE OUT OF 20MN-CR-5 MATERIAL AND HARDENED GRINDING FINISH |
| SPINDLE SHAFT IS MADE OUT OF SAE-8620 MATERIAL AND HARDENED GRINDING FINISH |
| WORM GEAR IS MADE OUT OF EN-24 MATERIAL |
| LIFTING SCREW NUT AND AUTO FEED WORM GEAR IS MADE OUT OF BRONZE METAL |
| STANDARD ACCESSORIES |
|---|
| MOTOR PULLEY |
| ELECTRICAL MOTOR |
| STATER |
| OPTIONAL ACCESSORIES |
| DRILL CHUCK |
| ARBOUR |
| DRILL CHUCK SLEEVE |
| DRILL VICE |
| Short Description |
|---|
| Max Drilling CAPACITY (M.S):38 |
| Max Drilling CAPACITY (C.I): 40 |
| Powe( HP): 1.5 |
| Spindle Speed (MIN/MAX): 50-1750 |
Technology From Tomorrow
Technical Specifications Of Product
Our product Technical Specifications and applications will give you a better insight into the product!
| SPECIFICATION | DIMENSIONS (MM) |
|---|---|
| MODEL | ER-AF-40/900 |
| DRILLING (M.S) | 38 |
| DRILLING(C.I) | 40 |
| BORING | 50 |
| TAPPING (M.S) | 20 |
| TAPPING (C.I) | 22 |
| DRILLING HEAD | |
| SPINDLE NOSE | MT-4 |
| SPINDLE NOSE OUTISDE DIAMETER | 78 |
| SPINDLE SLEEVE DIAMETER | 85 |
| TRAVEL OF SPINDLE | 240 |
| NO OF SPINDLE SPEED | 50-1750 |
| NO OF POWER FEED | FINE FEED |
| POWER | |
| DRILLING HEAD | 1.5 H.P |
| MOTOR-RPM | 1400-2800 |
| ELEVATING MOTOR FOR ARM | 0.5 H.P 1440 RPM |
| WORKING RANGE | |
| COLUMN DIAMETER | 170 |
| DIST.FROM SPINDLE TO BASE MIN/MAX | 960 X 230 |
| DIST FROM COLUMN TO CENTER MIN/MAX | 900 X 335 |
| DRILLING HEAD TARVELS | 560 |
| DRILLING RADIUS | 980 |
| TRAVERSE OF ARM | 785 |
| BASE PLATE | |
| HEIGHT OF BASE PLATE | 150 |
| WORKING SURFACE | 600 X 865 |
| NUMBER OF T-SLOTS | 4 |
| WIDTH OF CAST SIDE | 18 MM |
| OVERALL DIMENSIONS (LXWXH) | 1300 X 900 X 1800 |
| WEIGHT (APPROX) | 850 KG |
