Radial Drilling Machine Model ER-BF-40/900 - Available In Wide Ranges
Radial Drilling Machine Model ER-BF-40/900 are effective equipment to drill moderate to large workpieces. ESSKAY Lathe And Machine Tools manufacture high-end Radial Drilling Machine Model ER-BF-40/900 available in a wide variety of models and categories. The maximum M.S drilling capacity ranges from 38mm. We also customise our machines as per our client’s demands and applications.
| FEATURES | RIGID HEAD STOCK AND MAIN SPINDLE MOUNTED ON TAPER ROLLER BEARINGS ENSURE VIBRATION FREE CASTING |
|---|
| BACK GEARED ASSEMBLY DESIGNED BY FOUR SIDE BEARING BASED FITTING TO WITH STAND HEAVY LOAD |
| STEP PULLEY IS BALANCED BY COUNTER DRILLING |
| SPINDLE ASSEMBLY BALANCED BY GUIDED COUNTER WEIGHT |
| AUTOMATIC DISENGAGEMENT OF POWER FEED AT REQUIRED DEPTH OF DRILLING |
| DRILLING HEAD HAVING TAPER GUIDE WAYS WITH TAPER WEDGES PROVIDE STRENGTH TO WITH STAND HEAVY CUTTING FORCE |
| MACHINE OVER ALL CASTING MATERIAL IS HIGH QUALITY CLOSED GRAIN CASTING |
| MAIN SPINDLE IS MADE OUT OF EN-8-D, ALLOY STEEL MATERIAL GRINDING FINISH |
| ALL THE GEARS IS MADE OUT OF 20MN-CR-5 MATERIAL AND HARDENED GRINDING FINISH |
| SPINDLE SHAFT IS MADE OUT OF SAE-8620 MATERIAL AND HARDENED GRINDING FINISH |
| BACK GEARED CASTING MATERIAL IS MADE OUT OF SGI-412 GRADED CASTING |
| WORM GEAR IS MADE OUT OF EN-24 MATERIAL |
| LIFTING SCREW NUT AND AUTO FEED WORM GEAR IS MADE OUT OF BRONZE METAL |
| STANDARD ACCESSORIES |
|---|
| MOTOR PULLEY |
| OPTIONAL ACCESSORIES |
| MOTOR |
| STATER |
| V-BELT |
| DRILL CHUCK |
| ARBOUR |
| DRILL CHUCK SLEEVE |
| DRILL VICE |
| Short Description |
|---|
| Max Drilling CAPACITY (M.S):38 |
| Max Drilling CAPACITY (C.I): 40 |
| Powe( HP): 1.5 |
| Spindle Speed (MIN/MAX): 8 STEP PULLEY(130-2600) |
Technology From Tomorrow
Technical Specifications Of Product
Our product Technical Specifications and applications will give you a better insight into the product!
| SPECIFICATION | DIMENSIONS (MM) |
|---|---|
| MODEL | ER-BF-40/900 |
| DRILLING (M.S) | 38 |
| DRILLING(C.I) | 40 |
| BORING | 50 |
| TAPPING (M.S) | 20 |
| TAPPING (C.I) | 22 |
| DRILLING HEAD | |
| SPINDLE NOSE | MT-4 |
| SPINDLE NOSE OUTISDE DIAMETER | 78 |
| SPINDLE SLEEVE DIAMETER | 85 |
| TRAVEL OF SPINDLE | 240 |
| NO OF SPINDLE SPEED | 8 STEP PULLEY, 130-2600 |
| NO OF POWER FEED | FINE FEED |
| POWER | |
| DRILLING HEAD | 1.5 H.P |
| MOTOR-RPM | 1400-2800 |
| ELEVATING MOTOR FOR ARM | 0.5 H.P 1440 RPM |
| WORKING RANGE | |
| COLUMN DIAMETER | 170 |
| DIST.FROM SPINDLE TO BASE MIN/MAX | 900 X 300 |
| DIST FROM COLUMN TO CENTER MIN/MAX | 900 X 335 |
| DRILLING HEAD TARVELS | 560 |
| DRILLING RADIUS | 980 |
| TRAVERSE OF ARM | 785 |
| BASE PLATE | |
| HEIGHT OF BASE PLATE | 150 |
| WORKING SURFACE | 600 X 865 |
| NUMBER OF T-SLOTS | 4 |
| WIDTH OF CAST SIDE | 18 MM |
| OVERALL DIMENSIONS (LXWXH) | 1300 X 900 X 1800 |
| WEIGHT (APPROX) | 850 KG |
